Precision-Designed Sim Racing Accessories
Premium 3D-printed mounts, brackets, and accessories engineered for performance sim rigs. Designed and built in Utah, USA.
New products drop regularly. Be the first to know — no spam, just new drops.
Cross bar style cable tie down blocks for 8020 style aluminum sim rigs. These are so versatile and make cable management much easier! Works with racing and flight sim rigs — anything that uses 8mm metric aluminum profile channel width.
Comes in packs of 10 and can be made in multiple colors. Please note zip ties are not included so you can use any length you prefer.
Ever get tired of having to reach for stuff you set on the floor when in your rig? These vertically or horizontally mounted general purpose storage bins solve exactly that.
Great for your wireless mouse, wallet, phone, keys, VR controllers or whatever else you want to have quick access to without having to get out of your rig! Each storage bin has a floating design with no mounting bolts visible when mounted, and comes with all required hardware to mount to your 8020/8040 rig.
A solid race shoe holder for your aluminum profile rig. Mounts horizontally or vertically and has been tested to fit men's race shoe sizes 9 through 13 US.
Please note this holder will NOT work with regular typical sneakers as they are too wide — designed specifically for sim racing shoes.
Features a clean floating look with no mounting bolts visible for a sleek finish. The top accent lip is available in a range of colors, or you can go all black. Makes a nice easy place to put your shoes when not racing!
An easy to use keyboard holder designed specifically for aluminum profile rigs. Holds wireless keyboards up to 20mm / 0.79in thick on the ends — with an option for wider keyboards up to 31.75mm / 1.25in thick. For example, the Logitech K830 is about 16mm thick and has plenty of room.
Each end mounts individually so length is only limited by the length of your 8020/1530 profile. Each mount comes with 2 spring ball slot nuts and 2 M8 bolts that roll directly into the profile channel — no need to remove end caps!
The M8 bolts are flat head with a flush fit. Each mount uses a single bolt to secure to the profile with a locking block below — proven secure design. Two open horizontal profile slots are needed for best results, though it also works on single slot 40x40 profile.
Useful cable management clips that work perfectly in the typical sim racing and flight sim aluminum profile rigs — commonly referred to as 8020 rigs. Please note these DO NOT fit inch-based profile (1.5", 3") — only metric profile which is the most common.
Once pushed into the profile channel they can be slid along the profile to position exactly where you need them, then remain in place once adjusted. To remove simply pull them firmly from the channel. Can also be used side by side on 8040 profile for double cable routing.
Looking for a color not listed? Send a message and we'll see what we have!
Tired of the Z906 control box laying on the floor and always getting in the way? This horizontal mount attaches to any horizontal or vertical channel on your rig and features a pass-through in the bottom to route the controller's cable cleanly.
This updated version has a clean floating look with no mounting bolts visible. The top accent is available in various colors or all black. Gets the pesky control box off the floor and puts it somewhere easily within reach during sessions. All required mounting hardware is included.
A slide-in style 8020 wheel mount designed specifically for Fanatec Quick Release equipped wheels. Super easy to place your wheel in and pull it out — no fuss between sessions. The wheel spins freely in the mount allowing you to set any angle you like.
Single channel mounting design works in vertical or horizontal channel. All required mounting hardware is included.
A super high quality headphone and VR headset holder — not some tiny little hook, but a properly sized, solid mount that looks great on any rig. Nearly 5 hours of print time per unit means exceptional quality and finish.
Great size for just about any set of headphones or VR headset. Available in a range of colors including multi-color options that look especially impressive in person. Some color combinations require more time to produce but the results speak for themselves.
Mounts to horizontal or vertical 8020/1530 aluminum profile using 2 bolts and 2 spring ball slot nuts — all included. Just a genuinely nice looking holder!
A floating race glove holder with no visible mounting bolts — giving it a clean, premium look on your rig. Solid and sturdy, not flimsy. Built to the same high standard as every XSFSPD product.
Mounts in a single horizontal or vertical aluminum profile channel. The gloves pictured are extra large so this holder should accommodate just about any set of racing gloves. All required mounting hardware included.
Choose your own top accent color or go all one color — your call!
Not sure where to put your Z906 center channel or front/rear speakers? These mounts are designed to attach your Z906 speakers directly to 8020 style aluminum profile. Please note the mounts for the left/right front/rear speakers are universal — each mount works as either left or right, front or rear.
The center channel mount requires a piece of 4040 or 8040 profile attached to the back of your center monitor. If you have an 8020 style monitor mount this is quite straightforward — check the product photos and video for how it's done.
The front/rear left and right mounts attach to any single channel in the profile, mounted to the side and tilted in. Each mount is fully adjustable for both rotation and tilt angle. All hardware is included.
Please note: Only the mounts are included — no speakers or other equipment. Built for US version Z906 which uses a 1/4" bolt thread on the back of the speakers (included). International Z906 versions may use a different thread.
A purpose-built Stream Deck mount for 8020 and 1530 aluminum extrusion racing rigs. The mount swivels for proper angle adjustment and locks firmly in place once tightened — it won't shift during sessions.
The main mounting plate is angled upward so you can see your Stream Deck straight on while sitting in your rig. Available in four versions to match your specific Stream Deck model. All required hardware is included — slot nut, nuts, bolts and 3M Command Strips.
Attractive, single-piece and functional tabletop wheel stand for Fanatec QR1 and QR2 equipped wheels. Securely locks your wheel using the factory quick-release system — no accidental pull-offs. Available in Short and Tall heights and a range of colors.
Short is designed for F1 and GT style wheels. Tall fits D-shaped and larger round wheels — also fits F1/GT wheels higher up.
Fanatec logo printed in white. Custom logo colors available on request.
Attractive, single-piece and functional tabletop wheel stand for Simucube 2 and Simucube 3 equipped wheels. Securely locks your wheel using the factory quick-release system — no accidental pull-offs. Available in Short and Tall heights and a range of colors.
Short is designed for F1 and GT style wheels (GSI GXL Pro, Grid Engineering MPX, etc.). Tall fits D-shaped and larger round wheels — also fits F1/GT wheels higher up.
Simucube logo printed in orange. Custom logo colors available on request.
Attractive, single-piece and functional tabletop wheel stand for Logitech Pro and RS50 wheel bases. The Logitech quick release snaps securely into position — retaining collar must be pulled back to remove, just like on the wheel base.
Short and Tall heights available — both fit the stock Logitech Pro wheel great. Small size also works with the Logitech RS50 wheel.
Logo is blue when body is ordered in BLACK; white for all other body colors.
Attractive, single-piece and functional tabletop wheel stand for Moza, Simagic, and NRG style sim racing wheels (same mounting style). Securely locks your wheel using the factory quick-release system — no accidental pull-offs.
Short is designed for F1 and GT style wheels. Tall fits D-shaped and larger round wheels — also fits F1/GT wheels higher up.
Logos printed in white. Custom logo colors available on request.
The STANDARD size fits the typical soda can or 20oz soda bottle. The LARGE size is for larger drinks such as the 28oz Gatorade bottles as well as the square shaped 20oz Gatorade bottles.
A simple but useful high quality tank of a drink and phone holder. This isn't your cheap lightweight holder — it's solid, built to last, and no different from the high standard applied to every XSFSPD product.
This cup holder has a floating look with no mounting bolts to be seen. It can be mounted on a horizontal or vertical piece of profile and stays firmly in place. The phone slot is large enough to fit the biggest phones with the thickest phone cases or even small remotes.
The holder has the main body and the accent top cap. Looking for a certain color combination not listed? Send a message and we'll make it happen!
